Home / Automation System, Climate & Air Quality / Patterson Fans / 26" High-Velocity
Patterson 26" high-velocity fan
A 1 HP fan for big spaces: 7,650 CFM thrown out to 150 ft. We carry it with the inverter-duty motor, so a row of 26" fans can run from one variable frequency drive and be turned down when full speed isn't needed.
- 7,650
- CFM
- 150 ft
- Air throw
- 6,100 ft²
- Coverage per fan
- 1,800
- RPM
- 2 years
- Warranty
Inverter-duty motor
We carry this size with the inverter-duty three-phase motor, built to run from a variable frequency drive so a whole row of fans can be slowed or sped up together.
| SKU | Motor | Voltage | HP | Rated amps | Best for |
|---|---|---|---|---|---|
| H26B-INV | Inverter-duty three phase, for VFD speed control | 230V / 460V, 3-phase | 1 | — | Large rooms on a VFD |
Rated amps from Patterson's spec sheet. Rated amps for inverter-duty motors are not listed on Patterson's spec sheet; the VFD is sized to total fan horsepower.
26" fan specifications
| Air delivery | 7,650 CFM |
|---|---|
| Air throw | 150 ft |
| Coverage | 6,100 ft² |
| Propeller | 26" diameter, 3-blade galvanized aluminum, 18° pitch |
| Speed | 1,800 RPM |
| Sound | 80.8 dB @ 20 ft · 85.2 dB @ 3 ft |
| Dimensions | 33" W × 18.5" D |
| Inlet ID | 27" |
| Motor frame | 56 |
| Shipping weight | 85 lbs (yoke mount) |
| Fan inlet / outlet | High-impact polypropylene |
| Finger guards | OSHA compliant, spiral-wound steel |
| Mount | Yoke mount standard |
| Enclosure | TEAO (totally enclosed, air over) |
| Ambient rating | 104°F |
| Duty cycle | Continuous |
| Warranty | 2 years |
Mounts that fit
- RM 26-30 WHITERack mount, 21" arm. 41" W × 41" H with the fan installed, 103 lbs shipping.
- BCBeam clamp for structural beams and trusses.
- POLE 1'1 ft pole to drop the fan below a beam or ceiling mount.
Where the 26" High-Velocity fan works best
- Large flower halls and greenhouses, roughly 6,100 ft² per fan
- Facilities that want room-wide speed control from a VFD
- Beam or truss mounting high above the canopy with the beam clamp
Common questions
How is speed controlled on the INV model?
Inverter-duty fans run from a variable frequency drive (VFD). One drive can run a bank of fans; it is sized to the total horsepower on it and to the facility's input power. We carry E510 drives from 3 to 8 HP in 230V and 460V versions. See Patterson controls and VFDs.
How is it mounted?
Every fan ships with a yoke mount for walls, posts and ceilings. Rack mounts hang it from pallet racking or shelving to clear the canopy, and the beam clamp grips a structural beam or truss without drilling.
Can it run at lower speed?
Yes, through the VFD. Turning down the drive slows every fan on it, which lowers airspeed and noise when full speed isn't needed.
Documentation
Specifications from Patterson Fan Co. and subject to change by the manufacturer.
Other Patterson fans
See your pricing in your account
The Patterson 26" High-Velocity Fan is in the Hydro Supply portal. Sign in to see the price for your account and order, or send us your room layout and we'll spec the fan count, sizes and mounts.